Knowledgebase Home | Glossary | Favorites | Contact | Login Knowledgebase Home | Glossary | Favorites | Contact
Search the Knowledgebase Browse by Category

[Advanced Search]
Proto 2000 E6/E7 Mars Light Installation
Article Details

Last Updated
25th of October, 2010
Would you like to...
Print this page Print this page
Email this page Email this page
Post a comment Post a comment
Subscribe me
Add to favorites Add to favorites
Remove Highlighting Remove Highlighting
Edit this Article Edit this Article
Edit this Article Quick Edit
Export to PDF
User Opinions (0 votes)
No users have voted.
How would you rate this answer?
Helpful
Not helpful
Remove the 8 pin dummy plug from Lifelike Proto 2000 light board.

Before installing the decoder in the locomotive, unsolder the yellow wire from pin 2 and re-solder it to pin 3 (empty pin) on the decoder harness plug board.  We strongly recommend that you mark the decoder and/or harness so that you will remember that you have modified it.  If you use the decoder and/or harness modified in this manner in a different locomotive, your lights will not work correctly.




Plug the decoder and harness into the light board in the locomotive.

Program CVs as follows:  CV33 = 001, CV34 = 003, CV35 = 002

Use F1 to control Mars light on/off.
Visitor Comments
No visitor comments posted. Post a comment
Post Comment for "Proto 2000 E6/E7 Mars Light Installation"
To post a comment for this article, simply complete the form below. Fields marked with an asterisk are required.
   Your Name:
   Email Address:
* Your Comment:
* Enter the code below:
 
Related Articles
Attachments
No attachments were found.